Tri Axle 6750kg 9 Leaf Galvanised Dacromet Rocker Roller Trailer Spring & U Bolt Set. 7mm Thick Springs!
Tri Axle 6750kg 9 Leaf Galvanised Dacromet Rocker Roller Trailer Spring & U Bolt Set. 7mm Thick Springs!
9 LEAF HEAVY DUTY 6750KG TRI AXLE ROCKER ROLLER SPRING SET.
WITH TRI AXLE HIGH TENSILE 5/8" U BOLT KIT
SHOT PEENED DACROMET SPRINGS
All Huntsman Products rocker roller springs are 7mm thick giving on average an extra 750kg pay load per tri axle set. All Huntsman's roller bushes are solid steel and not plastic. All shackle spring bolts (roller and eye) are high tensile and all greasable.
6X 60MM X 7MM 9 LEAF GALVANISED/DACROMET ROCKER ROLLER SPRINGS (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT 60X8MM HANGERS
2X REAR 60X8MM HANGERS
4X CENTRE 50X8MM HANGERS
4X PAINTED GALVANISED/DACROMET ROCKER ARMS
6X SOLID STEEL 5/8” BUSHES
12X 5/8” GREASABLE SHACKLE PINS AND NYLOC NUTS
4X ¾” GREASABLE CENTRE SHACKLE PINS WITH CASTLE NUTS AND SPLIT PINS
TRI AXLE U BOLT KIT INCLUDES
12X 45MM SQUARE, 50MM SQUARE, 63MM SQUARE OR 65 MM ROUND GALVANISED HIGH TENSILE 5/8" U BOLTS WITH SPRING WASHERS AND NUTS (5/8 BSW)
6X GALVANISED 80 X 70 X 8MM SLOTTED FISH PLATES
6X GALVANISED AXLE PADS
ON ORDERING PLEASE PROVIDE YOUR AXLE THICKNESS FOR THE U BOLT SIZE
FULL ROCKER ROLLER SET WILL COME ASSEMBLED
On ordering all springs will come assembled to suit 14" wheels & tyres with an 870mm axle centres. If the requirement is for 15"/16" 970mm centres then its simply swap the front and rear springs of the same side which opens up the axle centres from 870mm to 970mm (options in main pictures)
DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.
SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.
Original: $723.58
-70%$723.58
$217.07More Images
Tri Axle 6750kg 9 Leaf Galvanised Dacromet Rocker Roller Trailer Spring & U Bolt Set. 7mm Thick Springs!
9 LEAF HEAVY DUTY 6750KG TRI AXLE ROCKER ROLLER SPRING SET.
WITH TRI AXLE HIGH TENSILE 5/8" U BOLT KIT
SHOT PEENED DACROMET SPRINGS
All Huntsman Products rocker roller springs are 7mm thick giving on average an extra 750kg pay load per tri axle set. All Huntsman's roller bushes are solid steel and not plastic. All shackle spring bolts (roller and eye) are high tensile and all greasable.
6X 60MM X 7MM 9 LEAF GALVANISED/DACROMET ROCKER ROLLER SPRINGS (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT 60X8MM HANGERS
2X REAR 60X8MM HANGERS
4X CENTRE 50X8MM HANGERS
4X PAINTED GALVANISED/DACROMET ROCKER ARMS
6X SOLID STEEL 5/8” BUSHES
12X 5/8” GREASABLE SHACKLE PINS AND NYLOC NUTS
4X ¾” GREASABLE CENTRE SHACKLE PINS WITH CASTLE NUTS AND SPLIT PINS
TRI AXLE U BOLT KIT INCLUDES
12X 45MM SQUARE, 50MM SQUARE, 63MM SQUARE OR 65 MM ROUND GALVANISED HIGH TENSILE 5/8" U BOLTS WITH SPRING WASHERS AND NUTS (5/8 BSW)
6X GALVANISED 80 X 70 X 8MM SLOTTED FISH PLATES
6X GALVANISED AXLE PADS
ON ORDERING PLEASE PROVIDE YOUR AXLE THICKNESS FOR THE U BOLT SIZE
FULL ROCKER ROLLER SET WILL COME ASSEMBLED
On ordering all springs will come assembled to suit 14" wheels & tyres with an 870mm axle centres. If the requirement is for 15"/16" 970mm centres then its simply swap the front and rear springs of the same side which opens up the axle centres from 870mm to 970mm (options in main pictures)
DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.
SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
9 LEAF HEAVY DUTY 6750KG TRI AXLE ROCKER ROLLER SPRING SET.
WITH TRI AXLE HIGH TENSILE 5/8" U BOLT KIT
SHOT PEENED DACROMET SPRINGS
All Huntsman Products rocker roller springs are 7mm thick giving on average an extra 750kg pay load per tri axle set. All Huntsman's roller bushes are solid steel and not plastic. All shackle spring bolts (roller and eye) are high tensile and all greasable.
6X 60MM X 7MM 9 LEAF GALVANISED/DACROMET ROCKER ROLLER SPRINGS (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT 60X8MM HANGERS
2X REAR 60X8MM HANGERS
4X CENTRE 50X8MM HANGERS
4X PAINTED GALVANISED/DACROMET ROCKER ARMS
6X SOLID STEEL 5/8” BUSHES
12X 5/8” GREASABLE SHACKLE PINS AND NYLOC NUTS
4X ¾” GREASABLE CENTRE SHACKLE PINS WITH CASTLE NUTS AND SPLIT PINS
TRI AXLE U BOLT KIT INCLUDES
12X 45MM SQUARE, 50MM SQUARE, 63MM SQUARE OR 65 MM ROUND GALVANISED HIGH TENSILE 5/8" U BOLTS WITH SPRING WASHERS AND NUTS (5/8 BSW)
6X GALVANISED 80 X 70 X 8MM SLOTTED FISH PLATES
6X GALVANISED AXLE PADS
ON ORDERING PLEASE PROVIDE YOUR AXLE THICKNESS FOR THE U BOLT SIZE
FULL ROCKER ROLLER SET WILL COME ASSEMBLED
On ordering all springs will come assembled to suit 14" wheels & tyres with an 870mm axle centres. If the requirement is for 15"/16" 970mm centres then its simply swap the front and rear springs of the same side which opens up the axle centres from 870mm to 970mm (options in main pictures)
DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.
SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.
